Power Units For Fork Lift 1
General Description:
This power unit is designed exclusively for the fork lift, consisting of high pressure gear pump, DC motor, multi-functional manifold, valves, tank, ect.
The up and down movement are controlled by the level of the mannal release valve, which is equipped with an electric switch for the motor start.
The lowering speed is automatically adjusted by the pressure compensated flow control valve.
Special notes
1.The duty of this power unit is S3, i.e., 30 seconds on and 270 seconds off.
2.Clean all the hydraulic parts concerned before mounting the power unit.
3.Viscosity of the hydraulic oil shoud be 15~68 cst, which should also be clean and free of impurities.N46 hydraulic oil is recommended.
4.Oil changing is required after the initial 100 operation hours, afterwards once every 3000 hours.
5.The power unit should be mounted horizontally.