RV Power Units 2
General Description
Equipped with a reversibe mortor,a bidirectional gear pump, double P.O. checke valves, relief valves and a tank etc. this power unit can drive a double acting cylinder to extend and retract without a directional solenoid valve. It is typically used inrecreational vehicles and machine tools.
|
Model |
Motor Volt |
Motor power |
Displacement |
System pressure |
Tank Capacity |
|
YBZS - E0.5S1T101/1 |
12VDC |
0.8KW |
0.5mL/r |
17.5MPa |
1.4L |
|
YBZS - E0.63S2T101/1 |
24VDC |
0.63mL/r |
Remark: Please go to page 38 or consult our sales engineer for the different pump displacement, motor power or tank capacity.
Special Notes
The duty of this power unit is S3, i.e., 30 seconds on and 270 seconds off.
Clean all the hydraulic parts concerned before mounting the power unit.
Viscosity of the hydraulic oil shoud be 15~68 cst,which should also be clean and free of impurities.N46 hydraulic oil is recommended.
The power unit can be mounted horizontally or vertically.
Check the oil level in the tank after the initial running of the power unit.
Oil changing is required after the initial 100 operation hours, afterwards once every 3000 hours.